Inspection Units are Designed and Manufactured Based on Engine Cross-Through Hole Paths

DOI: https://doi.org/10.62517/jes.202402405

Author(s)

Junzhen Gong, Hanlei Wang, Guilong Wang

Affiliation(s)

Weichai Power Co., Ltd., Weifang, Shandong, China

Abstract

The cross-hole penetration quality is critical in engine overall performance. In view of the large visual inspection error and the complexity of the oil pressure flow test procedure, the study designed a new quality inspection device for cross-cutting holes. The weight ball is pulled by the hand-held traction so that it slides down to the cross-section of the orifice, and the mass inspection of the cross-section of the orifice is completed by drawing the telescopic traction mechanism from the other end of the orifice, thereby effectively reducing the impact of human error, The purpose of increasing productivity.

Keywords

Cross-Through Hole Path; Quality Inspection; Telescopic Traction

References

[1] Yang Y, Liu a, Wang X, et al. influence of structure on the combustion characteristics of a small aero-gas turbine Engine combustor[J]. Fuel, 2022, 321: 124018 [2] Li J, Wang Y, Xing K, et al. the influence mechanism of pre-combustion chamber orifice structure on natural gas Engines: Combustion, emissions, and thermofluid analysis[J]. Applied Thermal Engineering, 2024, 236: 121654. [3] Yang J, Xie F, Jiang B, et al. influence of structure parameters of pre-chamber on lean combustion of active Pre-chamber jet ignition engine[J]. Energy, 2024, 304: 132053 [4] Jiang M, Sun W, Guo L, et al. numerical optimization of injector hole arrangement for marine methanol/diesel Direct dual fuel stratification engines[J]. Applied Thermal Engineering, 2024, 257: 124456 [5] Pastor J V, MicóC, Lewiski F, et al. Evaluation of the induced fuel injection concept for medium duty engines and Multi-hole patches: An optical analysis[J]. Applied Energy, 2024, 376: 124305