Design of Modularized Polymer Fluid Control Device System and Research on Polymer Flow Parameters_Vol. 3 No. 3 (JES 2025)_Journal of Engineering System (ISSN: 2959-0604)

Home > Journal of Engineering System (ISSN: 2959-0604) > Vol. 3 No. 3 (JES 2025) >

Design of Modularized Polymer Fluid Control Device System and Research on Polymer Flow Parameters

DOI: https://doi.org/10.62517/jes.202502305

Author(s)

Dengping Hu1, Qian Leng2, Longwei Zhong1, Dandan Wang3*, Jiahui Liang1, Shijiong Luo1

Affiliation(s)

1Sino-German College of Intelligent Manufacturing, Shenzhen Technology University, Shenzhen, Guangdong China 2Faculty of Engineering, The Hong Kong Polytechnic University, Hong Kong, China 3School of Foreign Studies, Guangzhou University, Guangzhou, Guangdong, China *Corresponding Author

Abstract

This study designs a modular polymer fluid control device, which realizes the flexible regulation of different injection parameters (aperture, position, temperature) and basin structure (single cavity/double cavity splicing) through the standardized cubic cavity structure and replaceable injection module. Combined with the numerical simulation method of Computational Fluid Dynamics (CFD), the flow behavior of polyurethane fluids under different conditions is systematically investigated, and the quantitative relationship of parameters-flow-performance is established, which provides the theoretical basis and technical support for the optimization of the polymer processing process. The study not only helps to deeply understand the rheological characteristics of polymer fluid, but also provides guidance for complex mold design, intelligent process control, etc., and promotes polymer material processing technology to develop in the direction of high efficiency and precision. This research idea not only ensures the experimental feasibility, but also obtains conclusions of general significance, which sets the foundation for the flow analysis of more complex structures.

Keywords

Polymer Fluid; Control Device System; Polymer Flow Parameters; Flow Analysis

References

[1]Wang, Xinhua,Yuan, You,Chen, Donglin , et al.BaTiO3 Nanoparticles Coated with Polyurethane and SiO2 for Enhanced Dielectric Properties[J].ACS APPLIED NANO MATERIALS,2023,6,(4):2615-2624. [2]Bean, Ren H.Long, Timothy E.Recent trends in the additive manufacturing of polyurethanes[J].POLYMER INTERNATIONAL,2024,73,(1):5-8.DOI:10.1002/pi.6584. [3]Lei, Jianhua,Feng, Fan,Xu, Shu , et al.Study on Mechanical Properties of Modified Polyurethane Concrete at Different Temperatures[J].APPLIED SCIENCES-BASEL,2022,12,(6):3184. [4]Gao, Guohua,Sun, Min,Xu, Chuanchang , et al.Interlaminar Shear Characteristics of Typical Polyurethane Mixture Pavement[J].POLYMERS,2022,14,(18):3827-3827. [5]Li, Chao,Wang, Shanli,Luo, Yapei , et al.Ultra-high elongation MXene/polyurethane porous fibers with passive insulation, passive radiative heating and active heating properties for personal thermal management[J].CHEMICAL ENGINEERING JOURNAL,2024,500. [6]Patil, Chetan,Ghorpade, Ratnakar,Askhedkar, Rajesh.Investigation into the sound absorptivity of perforated panels with tapered hole geometries coupled with polyurethane foam[J].INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING -IJIDEM,2025,19,(3):1849-1868. [7]Garavatti, Julia,Ornaghi Jr, Heitor Luiz.A Short Review on Radiopaque Polyurethanes in Medicine: Physical Principles, Effect of Nanoparticles, Processing, Properties, and Applications[J].JOURNAL OF COMPOSITES SCIENCE,2024,8,(10):409-409. [8]Shivakumar, Neerakallu Dasappa,Deb, Anindya.Dependence of the mechanical properties of rigid PU foam on density[J].JOURNAL OF REINFORCED PLASTICS AND COMPOSITES,2022,41,(9-10):355-363. [9]Shuang, Gao, Juan, Wang,Yu, Hu.Experimental study on the influence of temperature and humidity on the fracture properties of polyurethane grouting materials[J].JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,2024,32,1299-1309. [10]Xin, Haihui, Zhang, Pengcheng, Zhang, Boyang, et al.Polyurethane Exothermic Polymerization and Phase Change Material Thermal Delay Matching: An Approach to Reducing Fire Risks in Mining Polymer Materials[J].ACS APPLIED POLYMER MATERIALS,2023,5,(10):7887-7898. [11]Akindoyo, John O.Beg, M. D. H.Ghazali, Suriati , et al.Polyurethane types, synthesis and applications - a review[J].RSC ADVANCES,2016,6,(115):114453-114482. [12]Wang, Haozhen, Liu, Yingshu,Lin, Lin.Behavior Characteristics and Thermal Energy Absorption Mechanism of Physical Blowing Agents in Polyurethane Foaming Process[J].POLYMERS,2023,15,(10):2285-2285. [13]Zhong, Yanhui,Xu, Shengjie,Cao, Cheng , et al.Influence of Temperature on the Mechanical Properties of Modified Low Exothermic Polyurethane Grouting Material and Engineering Applications[J].JOURNAL OF MATERIALS IN CIVIL ENGINEERING,2023,35,(11):04023391-04023391. [14]Jiang, Rijia,Zheng, Xiangyu,Zhu, Shanshan , et al.Recent Advances in Functional Polyurethane Chemistry: From Structural Design to Applications[J].CHEMISTRYSELECT,2023,8,(11). [15]Zhong, Yanhui,Xu, Shengjie,Chi, Jing , et al.Experimental study on the interface bonding characteristic of polyurethane and pavement materials[J].CONSTRUCTION AND BUILDING MATERIALS,2023,397,(1). [16]Li, Xinxin,Wang, Meng,Zheng, Dan , et al.Study on the failure mechanism between polyurethane grouting material and concrete considering the effect of moisture by digital image correlation[J].JOURNAL OF BUILDING ENGINEERING,2023,67.