Crack Analysis and Weldability Restoration of 800H Alloy High-Temperature Steam Pipelines

DOI: https://doi.org/10.62517/jes.202402412

Author(s)

Yongsheng Zhang1, Jinbao Zhang1, Xiaoqiang Li2

Affiliation(s)

1China Energy Engineering Group Tianjin Electric Power Construction Co., Ltd., Tianjin, China 2Nanjing Huarong Intelligent Technology Co., Ltd., Nanjing, Jiangsu, China

Abstract

The 800 alloy is extensively utilized in high-temperature equipment owing to its exceptional high-temperature strength and resistance to oxidation and corrosion. However, during prolonged service, the alloy undergoes microstructural changes, such as carbide precipitation, which weaken its integrity. Under the influence of operational stress, cracks may develop, ultimately leading to component failure. This study focuses on the failure analysis of cracks that formed after prolonged operation in an 800H alloy high-temperature steam pipeline, specifically in areas near the valve and weld joint. Detailed examinations of crack morphology and oxidation products revealed that the primary failure mechanism was stress relaxation cracking. To restore the pipeline’s functionality and extend its operational lifespan, a thermal performance restoration approach was applied. Samples from the 800H alloy were subjected to solution annealing—a heat treatment process designed to enhance its weldability. Post-treatment welding trials demonstrated a notable improvement in the alloy’s welding performance. Non-destructive testing confirmed the absence of cracks, while microstructural analysis verified that the heat treatment effectively eliminated microcracks in the weld joints.

Keywords

800H Alloy; Weldability; High-Temperature Oxidation; Stress Relaxation Cracking; Solution Annealing

References

[1] B. Huchtemann, Materials Sci. & Eng., 120 (1989), p.623. [2] O. S. Tatone and R. S. Pathania: Nuclear Eng. International, 30 (1985), p.36. [3] Liu Yu, Xu Wenliang, Effect of Stabilization Treatment on Corrosion Resistance of 800H Alloy, Heat Treatment. Volume 38, 2023, issue 1. p. 16-26 [4] Huang Jingxian, DEVELOPMENT OF 800 ALLOY U-SHAPED TUBE FOR STEAM-GENERATOR OF NUCLEAR POWER STATION, Steel Tubes, 1998, Issue 6, pp. 6-11. [5] D.A. Canonico, W.F. Savage, W.J. Werner, an G.M, Goodwin， Effects of Minor Elements on the Weldability of Hihg-Nickel Alloy, Symposium Proceeding, The Welding Research Council, New York, July 1969 [6] ASME Section II Part B, SB407 SPECIFICATION FOR NICKEL-IRON-CHROMIUM ALLOY SEAMLESS PIPE AND TUBE, The American Society of Mechanical Engineers, 2010 Ed. [7] Xiao Bin. Research on Coal Blending and Co firing Technology in Thermal Power Plants. Inner Mongolia Coal Economy, 2022 (16): 55-57 [8] Chen Junfeng. Coal fired clean power generation technology and research progress in thermal power plants. Chemical Engineering Management. 2018, (4). [9] Bai Xiaoqing. Innovation of coal-fired technology and improvement of combustion efficiency in thermal power plants. Electric Power Equipment Management, 2024 (16): 259-261. [10] Yang Qiao, Study on Corrosion Resistance of New Austenitic Heat-Resistant Alloys for Ultra-Supercritical Thermal Power Boilers. Jiangsu: Jiangsu University, 2018.